Kabe - the Kabe Therm WM insulation system
Price on request
discount price
net unit price
0,01zł for m²
minimum trading quantity
the amount of product
1.00 m²
total price
net list price
0,00zł
for 1.00 m²
total price
discounted net price
0,01zł
for 1.00 m²
price-list
gross unit price 0,00zł
for m²
discount price
gross unit price
0,01zł
for m²
minimum trading quantity
the amount of product
1.00 m²
total price
gross list price
0,00zł
for 1.00 m²
total price
gross discount price
0,01zł
for 1.00 m²
Product description
The Kabe Therm WM thermal insulation system is mainly used in buildings requiring increased fire protection. It is used in single and multi-family housing, public and industrial buildings, both in existing and newly built buildings, up to a height of 25 m (for buildings erected before April 1, 1995 up to and including the eleventh floor). To make it, you can use both façade panels (with disturbed fiber arrangement) and lamella panels (with directed fiber arrangement) of mineral wool. The system can be used on all common mineral substrates (i.e. concrete, cellular concrete, cement plaster, cement-lime, sandstone and on raw walls made of bricks, block, block and other such material in ceramic or lime-sand ) as well as on substrates covered with a good adhering coat of facade paint or thin-layer plaster. The external layer of the system is polysilicate (low-alkali silicate) plastering Novalit T, possible to make in a wide range of colors and textures. The Kabe Therm WM system is particularly recommended for old buildings (including historic buildings) and for buildings with walls made of porous material (i.e. cellular concrete, slag concrete, porous brick). Due to the very good acoustic properties, it is also suitable for insulating the building in areas with high noise levels. When insulating buildings with irregular and curved shapes, the system with lamella wool works best.
Technical data:
- type of thermal insulation layer: facade panels made of mineral wool or lamella,
- thickness of the thermal insulation layer: according to the technical design,
- method of fixing thermal insulation: gluing and mechanical fastening,
- mechanical connector application: required (specified in the technical design),
- reinforcing fabric: system fiberglass mesh with a weight of 165 g / m2,
- fire classification: fire retardant system (NRO),
- invoices: full, brushed / mixed,
- grain thickness: 1.5 mm; 2.0 mm; 2.5 mm; 3.0 mm
- adhesion: to concrete - greater or equal to 0.3 MPa; for façade mineral wool - greater or equal to 0.015 MPa, for lamellar mineral wool - greater or equal to 0.08 MPa,
- interlayer adhesion: for façade mineral wool - 0.015 MPa or more, for lamellar mineral wool 0.08 MPa or more
- water absorption (after 24 hours): smaller or equal to 1200 g / m2,
- impact resistance: greater or equal to 1 J,
- color: natural white,
- based on panels of non-flammable mineral wool,
- has the ability to give away moisture freely,
- prevents condensation inside the partition,
- ensures a significantly slowed process of facade clogging,
- ensures adequate thermal insulation of walls.
The system is subject to individual valuation.
Technical data