Neotherm - Neodach Premium Flooring
Price on request
discount price
net unit price
252,00zł for m3
minimum trading quantity
the amount of product
1.00 m3
total price
net list price
306,00zł
for 1.00 m3
total price
discounted net price
252,00zł
for 1.00 m3
price-list
gross unit price 376,38zł
for m3
discount price
gross unit price
309,96zł
for m3
minimum trading quantity
the amount of product
1.00 m3
total price
gross list price
376,38zł
for 1.00 m3
total price
gross discount price
309,96zł
for 1.00 m3
Product description
Neodach Premium Floor Styrofoam board is designed for thermal insulation in buildings with a payload of up to 2.1 tons / m2, has specific physical and mechanical properties, natural hydrophobicity, dimension stability after application, good thermal insulation properties, as well as high mechanical strength. It is also resistant to aging. In addition, the plate is absolutely ecological, free of compounds in FCKW, which destroy the ozone layer, safe for health, does not irritate the skin and does not cause allergies.
Application
- in accordance with RTQ ITB Technical and Quality Recommendation -1212/2010, in particular roof insulation and with usable load of up to 2.1 t / m2
- for thermal insulation of the roof in flat and sloping, new and regenerated
- for thermal insulation of floors on the ground and on a reinforced concrete ceiling normally loaded
attention
Styrofoam boards are produced with two types of edges with dimensions:
not milled 1000 x 500 mm panel thickness from 10 to 500 mm in steps, every 10 mm, milled at the plant 980 x 480 mm panel thickness from 50 to 150 or 200 mm (depending on the production plant) in steps, every 10 mm. Milled edges: additional payment PLN 5.00 / m3. Please provide information about the thickness and finish of the panel edges in the commentary to the order. Due to frequent price movements, for reasons beyond our control, please confirm the price each time you buy.
Technical data
- compressive stress at 10% strain relative:
- ≥ 70 kPa
- dimensional stability under constant normal laboratory conditions DS(N)5:
- ± 0,5 %
- Dimensional stability under specified temperature and humidity DS(70,-)2:
- <= 2 %
- fire classification - reaction to fire:
- E
- flatness (dimensional tolerance class):
- ± 10 mm
- flexural strength:
- ≥ 115 kPa
- length (dimensional tolerance class):
- ± 3 mm
- load:
- ≤ 2,1 t/m²
- squareness (dimensional tolerance class):
- ± 5/1000 mm/mm
- thermal conductivity λ:
- 0,039 W/mK
- thickness (dimensional tolerance class):
- ± 2 mm
- width (dimensional tolerance class):
- ± 3 mm
Attachments